Table of Contents
Advertisement
Caution – To protect electronic components from electrostatic damage, which can
permanently disable the server or require repair by service technicians, place
components on an antistatic surface, such as an antistatic discharge mat, an antistatic
bag, or a disposable antistatic mat. Wear an antistatic grounding strap connected to a
metal surface on the chassis when you work on server components.
Related Information
"Installing the Server" on page 23
■
"Handling Precautions" on page 21
■
"Tools Needed for Installation" on page 22
■
Tools Needed for Installation
To install the system, you must have these tools:
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
■
In addition, you must provide a system console device, such as:
ASCII terminal
■
Workstation
■
Terminal server
■
Patch panel connected to a terminal server
■
Related Information
"Optional Components" on page 23
■
"ESD Precautions" on page 21
■
"Installing the Server" on page 23
■
22
Netra SPARC T4-1 Server Installation Guide • January 2013
Advertisement
Table of Contents
Need help?
Do you have a question about the NETRA SPARC T4-1 and is the answer not in the manual?
Questions and answers