Powering On The Server For The First Time - Sun Oracle NETRA SPARC T4-1 Installation Manual

Powering On the Server for the First
Time
These topics include instructions for powering on the server for the first time,
booting the server, and configuring the Oracle Solaris OS.
Step Description
1. Review requirements for the AC or DC power
source, chassis ground, the DC connectors,
and the overcurrent protection.
2. For DC powered servers, assemble the DC
power cords.
3. Prepare the power cords.
4. Connect a serial terminal device or terminal
server to the SER MGT port.
5. Power on the server. Set Oracle Solaris OS
configuration parameters during the process.
6. (Optional) Configure the NET MGT port to
use a static IP address.
Related Information
"Preparing for Installation" on page 19
■
"Installing the Server" on page 23
■
"Connecting Cables" on page 67
■
Servers Administration
■
Links
"Electrical Specifications" on page 10
"DC Power Source, Power Connection, and
Grounding Requirements" on page 13
"Input Power Information" on page 11
"Overcurrent Protection Requirements" on
page 12
"Assemble the DC Power Cords" on page 80
"Prepare the Power Cords" on page 83
"Connect a Terminal or Emulator to the SER
MGT Port" on page 84
"Power On the Server for the First Time" on
page 85
"Oracle Solaris OS Configuration Parameters"
on page 87
"Assign a Static IP Address to the SP" on
page 88
79