PRODUCT INFORMATION
This menu allows the user to view the number of triggers involved and number of oscillography traces available. The cycles
per record value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillography
section of chapter 5 for details.
A trigger can be forced here at any time by setting "Yes" to the FORCE TRIGGER? command. See the
menu for information on clearing the oscillography records.
RECORDS
6.4.4 Breaker maintenance
ACTUAL VALUES RECORDS MAINTENANCE BREAKER 1(2)
BREAKER 1
There is an identical menu for each of the breakers.
The
BKR 1 ARCING AMP
arcing current records.
The
BREAKER OPERATING TIME
6
6.5 Product information
6.5.1 Model information
ACTUAL VALUES PRODUCT INFO MODEL INFORMATION
MODEL INFORMATION
6-22
BKR 1 ARCING AMP φA:
0.00 kA2-cyc
BKR 1 ARCING AMP φB:
0.00 kA2-cyc
BKR 1 ARCING AMP φC:
0.00 kA2-cyc
BKR 1 OPERATING TIME
φA:
0 ms
BKR 1 OPERATING TIME
φB:
0 ms
BKR 1 OPERATING TIME
φC:
0 ms
BKR 1 OPERATING
TIME: 0 ms
2
values are in units of kA
-cycles. See the
is defined as the slowest operating time of breaker poles that were initiated to open.
ORDER CODE LINE 1:
D30-A00-AAA-A0A-A0A
SERIAL NUMBER:
ETHERNET MAC ADDRESS
000000000000
MANUFACTURING DATE:
0
OPERATING TIME:
0:00:00
PMU FEATURE ACTIVE:
No
CT/ VT ADVANCED DIAG
ACTIVE: No
COMMANDS CLEAR RECORDS
Range: standard GE order code format (lines 1 to 4)
Range: standard GE serial number format
Range: standard Ethernet MAC address format
Range: YYYY/MM/DD HH:MM:SS
Range: operating time in HH:MM:SS
Range: Yes, No
Range: Yes, No
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
COMMANDS CLEAR
menu for clearing breaker