6 ACTUAL VALUES
PATH: ACTUAL VALUES
RECORDS
PMU
RECORDS
MESSAGE
The number of triggers applicable to the phasor measurement unit recorder is indicated by the
The status of the phasor measurement unit recorder is indicated as follows:
PATH: ACTUAL VALUES
RECORDS
PMU 1
RECORDING
MESSAGE
MESSAGE
MESSAGE
PATH: ACTUAL VALUES
RECORDS
BREAKER 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
There is an identical menu for each of the breakers. The
COMMANDS
CLEAR RECORDS
defined as the slowest operating time of breaker poles that were initiated to open.
GE Multilin
PMU RECORDS
NUMBER OF TRIGGERS:
0
PMU 1
RECORDING
PMU RECORDS
PMU 1(2) RECORDING
PMU 1 FORCE TRIGGER:
Yes
PUM 1 AVAILABLE
RECORDS: 0
PUM 1 SECONDS
PER RECORD: 0.0
PUM 1 LAST CLEARED:
2013/07/14 15:40:16
MAINTENANCE
BREAKER 1(4)
BKR 1 ARCING AMP φA:
0.00 kA2-cyc
BKR 1 ARCING AMP φB:
0.00 kA2-cyc
BKR 1 ARCING AMP φC:
0.00 kA2-cyc
BKR 1 OPERATING TIME
φA:
0 ms
BKR 1 OPERATING TIME
φB:
0 ms
BKR 1 OPERATING TIME
φC:
0 ms
BKR 1 OPERATING
TIME:
0 ms
BKR 1 ARCING AMP
menu for clearing breaker arcing current records. The
C60 Breaker Protection System
6.4.5 PHASOR MEASUREMENT UNIT RECORDS
Range: 0 to 65535 in steps of 1
See below.
NUMBER OF TRIGGERS
Range: No, Yes
Range: 0 to 65535 in steps of 1
Range: 0 to 6553.5 in steps of 0.1
Range: date and time in format shown
6.4.6 BREAKER MAINTENANCE
values are in units of kA
BREAKER OPERATING TIME
6.4 RECORDS
value.
6
2
-cycles. Refer to the
is
6-27