Vertical Units - GE D30 Instruction Manual

Line distance protection system
Hide thumbs Also See for D30:
Table of Contents

Advertisement

CHAPTER 3: INSTALLATION
PANEL CUTOUTS
Figure 3-2: Horizontal mounting (enhanced panel)
3
Figure 3-3: Horizontal mounting and dimensions (standard panel)

3.2.2 Vertical units

The D30 is available as a reduced size (¾) vertical mount unit, with a removable faceplate. The faceplate can be specified
as either standard or enhanced at the time of ordering. The enhanced faceplate contains additional user-programmable
pushbuttons and LED indicators.
The modular design allows the relay to be upgraded and repaired by qualified service personnel. The faceplate is hinged to
allow easy access to the removable modules, and is itself removable to allow mounting on doors with limited rear depth.
The case dimensions are shown in the following figure, along with panel cutout details for panel mounting. When planning
the location of your panel cutout, ensure that provision is made for the faceplate to swing open without interference to or
from adjacent equipment.
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
3-3

Advertisement

Table of Contents
loading

Table of Contents