GE D30 Instruction Manual page 422
Line distance protection system
Hide thumbs
Also See for D30:
- Instruction manual (686 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (620 pages)
Table of Contents
Advertisement
METERING
The metered phase voltage values are displayed in this menu. The "SRC 1" text is replaced by the name programmed by
the user for the associated source (see
6.3.2.5 Auxiliary voltage metering
ACTUAL VALUES METERING SOURCE SRC 1 AUXILIARY VOLTAGE
AUXILIARY VOLTAGE
SRC 1
The metered auxiliary voltage values are displayed in this menu. The "SRC 1" text is replaced by the name programmed by
the user for the associated source (see
6.3.2.6 Power metering
ACTUAL VALUES METERING SOURCE SRC 1 POWER
POWER
SRC 1
6
6-16
SETTINGS SYSTEM SETUP SIGNAL SOURCES
SRC 1 RMS Vx:
0.00 V
SRC 1 PHASOR Vx:
0.000 V
0.0°
SETTINGS SYSTEM SETUP SIGNAL SOURCES
SRC 1 REAL POWER
3φ: 0.000 W
SRC 1 REAL POWER
φa: 0.000 W
SRC 1 REAL POWER
φb: 0.000 W
SRC 1 REAL POWER
φc: 0.000 W
SRC 1 REACTIVE PWR
3φ: 0.000 var
SRC 1 REACTIVE PWR
φa: 0.000 var
SRC 1 REACTIVE PWR
φb: 0.000 var
SRC 1 REACTIVE PWR
φc: 0.000 var
SRC 1 APPARENT PWR
3φ: 0.000 VA
SRC 1 APPARENT PWR
φa: 0.000 VA
SRC 1 APPARENT PWR
φb: 0.000 VA
SRC 1 APPARENT PWR
φc: 0.000 VA
SRC 1 POWER FACTOR
3φ:
1.000
SRC 1 POWER FACTOR
φa:
1.000
SRC 1 POWER FACTOR
φb:
1.000
SRC 1 POWER FACTOR
φc:
1.000
).
).
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Advertisement
Table of Contents
