Teleprotection Inputs; Contact Outputs; Virtual Outputs - GE D30 Instruction Manual

STATUS
The D30 is provided with optional IEC 61850 capability. This feature is specified as a software option at
the time of ordering. See the Order Codes section of chapter 2 for details.

6.2.5 Teleprotection inputs

ACTUAL VALUES  STATUS  TELEPROTECTION INPUTS
 TELEPROTECTION
 INPUTS
The present state of teleprotection inputs from communication channels 1 and 2 are shown here. The state displayed is
that of corresponding remote output unless the channel is declared failed.

6.2.6 Contact outputs

ACTUAL VALUES  STATUS  CONTACT OUTPUTS
6
 CONTACT OUTPUTS

The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
output. For example, 'Cont Op 1' refers to the contact output in terms of the default name-array index. The second line of
the display indicates the logic state of the contact output.
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn, and VOn.
For form-C contact outputs, the state is displayed as Off or On.

6.2.7 Virtual outputs

ACTUAL VALUES  STATUS  VIRTUAL OUTPUTS
 VIRTUAL OUTPUTS

6-4
RxGOOSE DPS 5

TELEPROTECTION

INPUT 1-1: Off

TELEPROTECTION

INPUT 1-16: Off
TELEPROTECTION

INPUT 2-1: Off

TELEPROTECTION

INPUT 2-16: Off
Cont Op 1

Off

Cont Op xx

Off
Virt Op 1

Off

Virt Op 96

Off
Range: On, Off, Intermediate, Bad
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off
Range: On, Off
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES