GE D30 Instruction Manual page 150

PRODUCT SETUP
5
For the Security panel, the following settings are available.
Table 5-3: RADIUS server settings
Setting name
Primary RADIUS IP
Address
Primary
Authentication Port
Primary Accounting
Port
Vendor ID
RADIUS
Authentication
(Shared) Secret
RADIUS
Authentication
Method
Timeout
Retries
5-18
Figure 5-4: Supervisory panel
Description
IP address of the main RADIUS server.
Default value indicates no Primary
RADIUS server is configured, and hence
RADIUS is disabled.
RADIUS authentication port
RADIUS accounting port
An identifier that specifies RADIUS
vendor-specific attributes used with the
protocol
Shared secret used in authentication. It
displays as asterisks. This setting must
meet the CyberSentry password
requirements.
Authentication method used by RADIUS
server. Currently fixed to EAP-TTLS.
Timeout in seconds between re-
transmission requests
Number of retries before giving up
Minimum Maximum
0.0.0.0 223.255.255.254
1 65535
1 65535
See the See the following
Password password section
Requirements for requirements
section earlier
in this chapter
EAP-TTLS EAP-TTLS
0 9999
0 9999
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: SETTINGS
Default Units Minimum
permission
0.0.0.0 - Administrator
1812 - Administrator
1813 - Administrator
Value that Administrator
represents
General
Electric
N/A - Administrator
EAP-TTLS - Administrator
10 sec Administrator
3 - Administrator