Phasor Measurement Unit Records; Breaker Maintenance - GE D60 Instruction Manual
Line distance protection system
Hide thumbs
Also See for D60:
- Instruction manual (826 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (780 pages)
Table of Contents
Advertisement
RECORDS
The
NEWEST SAMPLE TIME
rate. If the data logger channels are defined, then both values are static.
See the
COMMANDS CLEAR RECORDS
6.5.5 Phasor measurement unit records
ACTUAL VALUES RECORDS PMU RECORDS
PMU
RECORDS
The number of triggers applicable to the Phasor Measurement Unit recorder is indicated by the
The status of the phasor measurement unit recorder is indicated as follows.
ACTUAL VALUES RECORDS PMU RECORDS PMU 1 RECORDING
PMU 1
RECORDING
6.5.6 Breaker maintenance
ACTUAL VALUES RECORDS MAINTENANCE BREAKER 1(2)
6
BREAKER 1
6-30
represents the time the most recent samples were taken. It counts up at the defined sampling
menu for clearing data logger records.
NUMBER OF TRIGGERS:
0
PMU 1
RECORDING
PMU 1 FORCE TRIGGER:
Yes
PUM 1 AVAILABLE
RECORDS: 0
PUM 1 SECONDS
PER RECORD: 0.0
PUM 1 LAST CLEARED:
2013/07/14 15:40:16
BKR 1 ACC ARCING AMP
φA: 0.00 kA2-cyc
BKR 1 ACC ARCING AMP
φB: 0.00 kA2-cyc
BKR 1 ACC ARCING AMP
φC: 0.00 kA2-cyc
BKR 1 OPERATING TIME
φA:
0 ms
BKR 1 OPERATING TIME
φB:
0 ms
BKR 1 OPERATING TIME
φC:
0 ms
BKR 1 OPERATING
TIME: 0 ms
BKR 1 ARCING AMP φA:
0.00 kA2-cyc
BKR 1 ARCING AMP φB:
0.00 kA2-cyc
BKR 1 ARCING AMP φC:
0.00 kA2-cyc
BKR 1 AMP MAX φA:
0.00 kA
Range: 0 to 65535 in steps of 1
See below
Range: No, Yes
Range: 0 to 65535 in steps of 1
Range: 0 to 6553.5 in steps of 0.1
Range: YYYY/MM/DD HH:MM:SS
D60 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
value.
NUMBER OF TRIGGERS
Advertisement
Table of Contents
