Digital Counters; Selector Switches; Flex States; Ethernet - GE D30 Instruction Manual

STATUS

6.2.11 Digital counters

ACTUAL VALUES  STATUS  DIGITAL COUNTERS  DIGITAL COUNTERS Counter 1(8)
 DIGITAL COUNTERS
 Counter 1
The present status of the eight digital counters displays here. The status of each counter, with the user-defined counter
name, includes the accumulated and frozen counts (the count units label also appears). Also included, is the date and time
stamp for the frozen count. The

6.2.12 Selector switches

ACTUAL VALUES  STATUS  SELECTOR SWITCHES
 SELECTOR SWITCHES

The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.

6.2.13 Flex states

6
ACTUAL VALUES  STATUS  FLEX STATES
 FLEX STATES

There are 256 FlexState

6.2.14 Ethernet

ACTUAL VALUES  STATUS  ETHERNET
 ETHERNET

These values indicate the status of the first, second, and third Ethernet links.
6-6
Counter 1

0
Counter 1 FROZEN:

0
Counter 1 FROZEN:

YYYY/MM/DD HH:MM:SS
Counter 1 MICROS:

0
value refers to the microsecond portion of the time stamp.
COUNTER 1 MICROS
SELECTOR SWITCH 1

POSITION: 0/7
SELECTOR SWITCH 2

POSITION: 0/7
PARAM 1: Off

Off
PARAM 256: Off

Off
TM
bits available. The second line value indicates the state of the given FlexState bit.
ETHERNET PRI LINK

STATUS: Fail
ETHERNET SEC LINK

STATUS: Fail
ETHERNET TRD LINK

STATUS: Fail
ACCUM:
Range: Current Position / 7
Range: Current Position / 7
Range: On, Off

Range: On, Off
Range: Fail, OK
Range: Fail, OK
Range: Fail, OK
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES