Drive Onboard Application Lite Ladder Program Average Scan Time; Drive Onboard Application Lite Ladder Program First Run - Emerson unidrive sp User Manual

Parameter Keypad and Parameter
structure display x.00
11.50

Drive Onboard Application Lite Ladder Program Average Scan Time

Drive modes Open-loop, Closed-loop vector, Servo, Regen
Bit SP
Coding
Open-loop, Closed-loop vector, Servo,
Range
Regen
Update rate Onboard Application Lite Ladder program execution period
This parameter is updated once per second or once per Onboard PLC program scan whichever is the longest. If more than one program scan occurs
within the one second update period the parameter shows the average scan time. If the program scan time is longer than one second the parameter
shows the time for the last program scan.
11.51

Drive Onboard Application Lite Ladder Program first run

Drive modes Open-loop, Closed-loop vector, Servo, Regen
Bit SP
Coding
1
Open-loop, Closed-loop vector, Servo,
Range
Regen
Update rate Onboard Application Lite Ladder program execution period
The Drive Onboard Application Lite Ladder Program first run parameter is set for the duration of the first ladder diagram scan from the ladder diagram
stopped state. This enables the user to perform any required initialisation every time the ladder diagram is run. This parameter is set every time the
ladder is stopped.
Unidrive SP Advanced User Guide
Issue Number: 10
Parameter Advanced parameter
description format descriptions
FI DE Txt VM DP ND
1
0 to 65,535 ms
FI DE Txt VM DP ND
1
0 or 1
www.controltechniques.com
Serial comms
Macros
protocol
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1
Electronic
Performance RFC mode
nameplate
PS
1
PS
Menu 11
217