Technical Specifications; Table 5.1 Environmental Specifications; Table 5.2 Max. Welding Force, Dynamic Trigger Force, Dynamic Follow-Through; Table 5.3 Maximum Traverse Speed (Application Dependant) - Emerson Branson 2000X ae Operating Manual

5.1

Technical Specifications

5.1.1 Requirement Specifications
The 2000Xae Actuator requires compressed air. The factory air source must be "clean (5
micron) and dry", that is, does not include moisture or lubricants. The Actuator requires
70 psi minimum pressure for operation and cooling, and can require up to 100 psig
maximum, depending on the application. The following table lists environmental
specifications for the ultrasonic welder.
Table 5.1
Environmental Concern
Humidity
Ambient Temperature
Storage/Shipping Temperature
All electrical input power connections are to the Power Supply.
5.1.2 Performance Specifications
The following tables detail some of the performance specifications associated with the
2000Xae Actuator.
Table 5.2
Cylinder
Size
1.5"
2.0"
2.5"
3.0"
3.25"
Table 5.3
Down and Return
Speed
Minimum Stroke: 1/8" / 3.2 mm
Maximum Stroke: 3-3/4" / 95.2 mm (for a 4" cylinder)
80
Environmental Specifications
Max. welding force, dynamic trigger force, dynamic follow-through
Max. clamp
force at
100 psig/690
triggering range
kPa and
4"stroke
130 lbs / 578 N 5-159 lbf / 22-707 N
270 lbs / 1.2 kN 15-180 lbf / 67-800 N
440 lbs / 1.96 kN 15-180 lbf / 67-800 N
640 lbs / 2.84 kN 15-180 lbf / 67-800 N
770 lbs / 3.42 kN 15-180 lbf / 67-800 N
Maximum Traverse Speed (Application dependant)
Up to 7 inch/ 177.8 mm per sec. max at 3.5-inch / 88.9 mm
stroke, 90 psi (all cylinder sizes)
Acceptable Range
30% to 95% non-condensing
+5° C to +50° C (+41° F to +122° F)
-25° C/-13° F to +55° C/+131° F
(+70° C/+158° F for 24 hours)
Dynamic Dynamic follow-
through range
15-180 lbf / 67-800 N
15-180 lbf / 67-800 N
15-180 lbf / 67-800 N
15-180 lbf / 67-800 N
15-180 lbf / 67-800 N
Stroke
length
4" / 101.6 mm
4" / 101.6 mm
4" / 101.6 mm
4" / 101.6 mm
4" / 101.6 mm
1019571 REV. 03