Emerson unidrive sp User Manual page 192

Parameter Keypad and
Menu 10
structure display
Trip
SLX.Er Solutions Module slot X trip: Solutions Module in slot X has detected a fault
Automation (I/O Expansion) module category
Check value in Pr 15/16/17.50. The following table lists the possible error codes for the SM-I/O Plus, SM-I/O Lite, SM-I/O Timer, SM-
I/O PELV, SM-I/O 120V, SM-I/O 32 and SM-I/O 24V Protected. See the Diagnostics section in the relevant Solutions Module User
Guide for more information.
Error code
0
1
202,207,212
2
3
4
5
74
SLX.Er Solutions Module slot X trip: Solutions Module in slot X has detected a fault
Fieldbus module category
Check value in Pr 15/16/17.50. The following table lists the possible error codes for the Fieldbus modules. See the Diagnostics
section in the relevant Solutions Module User Guide for more information.
Error code
0
1
2
52
58
61
62
63
64
65
202,207,212
66
69
70
74
75
76
80
81
82
83
84
85
86
87
97
98
99
192
Parameter Parameter
x.00 description format
Module
All
All
SM-I/O Lite, SM-I/O Timer
SM-I/O PELV, SM-I/O 24V Protected
SM-I/O PELV, SM-I/O 24V Protected
SM-I/O 24V Protected
SM-I/O PELV
SM-I/O Timer
All
Module
All
SM-EtherCAT
SM-EtherCAT
SM-PROFIBUS-DP, SM-INTERBUS,
SM-DeviceNet, SM-CANOpen
SM-LON
SM-PROFIBUS-DP, SM-INTERBUS,
SM-DeviceNet, SM-CANOpen,
SM-SERCOS, SM-LON
SM-EtherCAT
SM-EtherCAT
SM-DeviceNet
SM-PROFIBUS-DP, SM-INTERBUS,
SM-DeviceNet, SM-CANOpen,
SM-SERCOS, SM-LON
SM-PROFIBUS-DP
SM-CAN, SM-DeviceNet, SM-CANOpen
SM-CAN, SM-EtherCAT
All (except SM-Ethernet and SM-LON)
SM-Ethernet, SM-LON
All
SM-Ethernet, SM-EtherCAT
SM-Ethernet, SM-EtherCAT
All (except SM-SERCOS)
All (except SM-SERCOS)
All (except SM-SERCOS)
All (except SM-SERCOS)
SM-Ethernet, SM-EtherCAT
SM-Ethernet, SM-EtherCAT
SM-Ethernet, SM-EtherCAT
SM-Ethernet
SM-Ethernet
All
All
www.controltechniques.com
Advanced parameter
Macros
descriptions
Diagnosis
No errors
Digital output overload
Analog input 1 current input too high (>22mA) or too low (<3mA)
Digital input overload
Analog input 1 current input too low (<3mA)
Communications error
User power supply absent
Real time clock communication error
Module over temperature
No trip
No fieldbus mode has been selected
Critical task over-run
User control word trip
Incorrect non-volatile storage
Configuration error
Database initialization error
File system initialization error
Expected packet rate timeout
Network loss
Critical link failure
Bus off error
No acknowledgement
Flash transfer error
No valid menu data available for the module from the drive
Solutions module over temperature
The drive is not responding
The Modbus connection has timed out
Inter-option communications error
Communications error to slot 1
Communications error to slot 2
Communications error to slot 3
Memory allocation error
File system error
Configuration file error
Language file error
Timed event over-run
Internal watchdog error
Internal software error
Serial comms Electronic
Performance RFC mode
protocol nameplate
Reason for fault
Trip Description
Unidrive SP Advanced User Guide
Issue Number: 10