Special Display Functions - Emerson unidrive sp User Manual

Parameter Keypad and
Parameter x.00
structure display
2.12

Special display functions

The following special display functions are used.
1. If the second motor map is being used the decimal point second
from the right of the first row is on.
2. When parameters are saved to a SMARTCARD the right-most
decimal point on the first row flashes for 2 seconds.
During power up one or more of the following actions may be required.
Each action may take several seconds, and so special display strings
are shown.
Display
Action
string
If a SMARTCARD is present with Pr 11.42 set to boot the
boot parameters from the card must be transferred to the drive
EEPROM.
If the drive is in auto or boot mode (Pr 11.42 set to 3 or 4) the
card drive ensures that the data on the card is consistent with the
drive by writing to the card.
It may be necessary for a Solutions Module to transfer
parameter information from the drive. This is only carried out
loading if the parameter information held by the Solutions Module is
for a different drive software version. The drive allows up to
five seconds for this process.
Unidrive SP Advanced User Guide
Issue Number: 10
Parameter Advanced parameter
description format descriptions
www.controltechniques.com
Serial comms Electronic
Macros
protocol nameplate
Performance RFC mode
15