T26 Digital I/O 3 Output Select; T28 & T29 Digital Input Auto-Selection Disable - Emerson unidrive sp User Manual

Parameter Keypad and Parameter
structure display x.00
8.31 T24 digital I/O 1 output select
8.32 T25 digital I/O 2 output select
8.33

T26 digital I/O 3 output select

Drive modes Open-loop, Closed-loop vector, Servo, Regen
Bit SP
Coding
1
Open-loop, Closed-loop vector, Servo,
Default
Regen
Update rate Background read
OFF (0) = Terminal is an input
On (1) = Terminal is an output
8.39 T28 & T29 digital input auto-selection disable
Drive modes Open-loop, Closed-loop vector, Servo, Regen
Bit SP
Coding
1
Default Open-loop, Closed-loop vector, Servo
Update rate Background read
When this parameter is 0, Pr 8.25 and Pr 8.26 are set up automatically according to the setting of the reference select Pr 1.14. Setting this parameter
to 1 disables this function.
Reference select Pr 1.14
0, A1.A2 Reference selection by terminal input
1, A1.Pr Analog reference 1 or presets selected by terminal input
2, A2.Pr Analog reference 2 or presets selected by terminal input
3, Pr Preset reference selected by terminal input
4, Pad Keypad reference selected
5, Prc Precision reference selected
This parameter has no effect in Regen mode.
Unidrive SP Advanced User Guide
Issue Number: 10
Parameter Advanced parameter
description format descriptions
FI DE Txt VM DP ND
Pr 8.31 = On (1),
Pr 8.32 and Pr 8.33 = OFF (0)
FI DE Txt VM DP ND
OFF (0)
www.controltechniques.com
Serial comms
Macros
protocol
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1
Pr 8.25 set to:
Pr 1.41 - Analog ref 2 select
Pr 1.45 - preset select bit 0
Pr 1.45 - preset select bit 0
Pr 1.45 - preset select bit 0
Pr 1.41 - Analog ref 2 select
Pr 1.41 - Analog ref 2 select
Electronic
Performance RFC mode
nameplate
PS
PS
Pr 8.26 set to:
Pr 6.31 - jog
Pr 1.46 - preset select bit 1
Pr 1.46 - preset select bit 1
Pr 1.46 - preset select bit 1
Pr 6.31 - jog
Pr 6.31 - jog
Menu 8
169