Table of Contents
Advertisement
User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
How to set display system
Display system is to set on/off for channel and BUS, also to adjust the contrast of
panel display. Press "A(DISPLAY)" and panel display as Fig. 76
Display function menu as below;
Function
Setting
Source
BUS
Channel
BUS SEL.
BUS0～BUS3
CH SEL
CH00～CH0F
display
ON
OFF
contrast
Increase
contrast
Decrease
For example, display channel as CH00～CH03 and BUS as BUS0, other channels
and BUS all off. Follow up below steps:
1、Press "A(DISPLAY)" and display menu appears
2、Press "F1" till signal source display as "BUS"
3、Press "F2" till BUS No. display as "BUS0"
4、Press "F3" to choose signal display as "ON".
5、Press "F2" till BUS No. display as "BUS1".
6、 Press "F3" to choose signal display as "OFF". Repeat the operation of
Fig 76：Display menu
Instruction
Choose resource as BUS
Choose resource as channel
Among BUS0~BUS3
Among CH00~CH0F
BUS or Channel on
Bus or Channel off
Increase panel display contrast
Decrease panel display contrast
78
Advertisement
Table of Contents
