Table of Contents
Advertisement
User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
Fig. 58 Waveform of Voltage Cursor Measurement
Carry out the following operation steps for the time cursor measurement of the
channel CH1:
1. Press "CURSOR" and recall the CURS MEAS menu.
2. Press the F1 menu selection button and choose Time for Type, with two purple
dotted lines displayed along the vertical direction of the screen, which indicating
Cursor 1 and Cursor 2.
3. Press the F2 menu selection button and choose CH1 for Source.
4. Adjust the positions of CURSOR1 and CURSOR2 according to the measured
waveform, with the period and frequency of Cursor1 and Cursor 2 displayed in
the increment window. The current position of Cursor1 is displayed in the
Cursor1 window and that of Cursor2 is displayed in the Cursor2 window (see Fig.
59).
62
Advertisement
Table of Contents
