Application Of Vertical Position And Volts/Div Knobs - Owon MSO5022 User Manual

User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
Application of VERTICAL POSITION and VOLTS/DIV
Knobs
1. The .VERTIVAL POSITION knob is used to adjust the vertical positions of the
wave forms of all Channels (including those resulted from the mathematical
operation).
The analytic resolution of this control knob changes with the vertical division.
2. The VOLTS/DIV knob is used to regulate the vertical resolution of the wave
forms of all channels (including those obtained from the mathematical
manipulation), which can determine the sensitivity of the vertical division with
the sequence of 1-2-5. The vertical sensitivity goes up when the knob is rotated
clockwise and goes down when the knob is rotated anticlockwise.
3. When the vertical position of the channel wave form is adjusted, the screen shows
the information concerning the vertical position at the lower left corner (see
Fig.27).
Fig. 27 Information about Vertical Position
37