How To Set Bus - Owon MSO5022 User Manual

User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
steps 5.6 and set BUS2, BUS3 as "OFF".
7、Press "F1" till signal source display as "Channel"
8、Press "F2" or turn "CH1 Volts/div" knob till channel display as
"CH00".
9、Press "F3" to choose signal source as "ON".
10、Repeat operation of steps 8.9 and set CH01、CH02、CH03 as "ON".
11、Press "F2" or turn "CH1 Volts/Div" knob till channel display as
CH04.
12、Press "F3" to choose signal display as "OFF".
13、Repeat operation of steps 8.9 and set CH05~CH0F all as "OFF".
Channel display setting finished (refer to Fig. 77)

How to set BUS

LA includes four groups BUS (BUS0~BUS3). Every group can cover any
channel even all channels. BUS menu display as Fig. 78
Fig 77：Display setting
79