Owon MSO5022 User Manual page 89

User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
Cursor measure position menu as below:
Function Display
M1-M2 Position
Cursor 1 Position
Cursor 2 Position
Follow up below steps to measure data width of pulse with cursor measurement
1. Press "9(CURSOR)" and Cursor menu appears.
2. Press "F1" till cursor display as" position". Two purples vertical lines
display in panel and refer to Cursor 1 and Cursor 2 separately.
3. Turn "CH1 POSITION" knob and set Cursor 1 position in falling edge of CH00
4. Turn "CH2 POSITION" knob and set Cursor 2 position in next falling edge of
CH00.
5. Now the position difference between two cursors display in "F2" is "-10" which
means there is 10 acquired data between two cursors. The position of Cursor 1
corresponds to trigger in memory position display in "F3" as "2097158". The
position of Cursor 2 corresponds to trigger in memory position display in "F4" as
"2057168".
Instruction
The position difference between two cursors in
memory area.
The position of cursor 1 corresponds to trigger in
memory area.
The position of cursor 2 corresponds to trigger in
memory area.
Fig 89：Cursor position measurement
89