Table of Contents
Advertisement
User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
2. Search specified value in BUS
Searching BUS menu as below:
Function
BUS
BUS0～BUS3
Code type
0x0000～0xffff
（HEX）
0～65535
（DEC）
Previous
Next
For example, follow up below steps to search the data of 0x18 values in BUS0
A、Press "2(SEARCH)" and menu appears.
B、Press "F1" till target display as "BUS".
C、Press "F2" till BUS SEL as "BUS0".
D、Press "F3" and choose "Code type ", value under displayed with red
background and green digital indicator in the panel is on. Then insert the
value of "18" by digital key in the panel to get start.
E、Press "F3" again and red background for value under code is disappeared
and value setting finished. Repeat operation of steps D. E if need to modify
the value.
F、Press "F4" and choose "Previous" to searching the matched value prior to
current cursor. Cursor will stop in this value if it has and info window show
Fig 83：Search trigger position
Setting
Choose searching BUS
Can be set discretionarily between 0x0000
and 0xffff （HEX）or between 0 and 65535
(DEC） according to the bus and code setting.
Search the matched value prior to current
cursor
Search the matched value after current
cursor.
Instruction
84
Advertisement
Table of Contents
