How To Conduct The Automatic Measurement - Owon MSO5022 User Manual

User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
The "SYS STAT" menu is described as the following table:
Function Menu
Horizontal
Vertical
Trigger
Misc
After entering into the SYS STAT menu, choose the corresponding function, with the
corresponding parameters shown in the screen. If press the F1 menu selection button
and choose the function item "Horizontal", the Horizontal System State will be
displayed in the screen. Press any other function button and exit from the SYS STAT
menu (see Fig. 54).

How to Conduct the Automatic Measurement

With the Measure button pressed down, an automatic measurement can be
implemented. There are 5 types of measurements and 4 measurement results can be
displayed simultaneously.
Press the F1 menu selection button to choose Source or Type menu. You can choose
the channel to be measured from the Source menu and choose the measurement Type
(Freq, Period, Mean, PK–PK, and Cyc RMS). The menu is displayed as Fig. 55.
Setting Description
Show the horizontal parameter of the channel.
Show the vertical parameter of the channel.
Show the parameters of the trigger system.
Show the serial number and edition number.
Fig. 54 Horizontal System State
58