Table of Contents
Advertisement
User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
Fig. 55 Measure Menu
Measure
Four automatic measured values can be detected on each channel simultaneously.
Only if the waveform channel is in the ON state can the measurement be carried out.
No automatic measurement can be made in the following situation: 1) on the saved
waveform. 2) on the mathematical waveform. 3) on the XY format. 4) on the Scan
format.
Measure the frequency, the peak-to-peak value of the Channel CH1 and the mean, the
RMS of the Channel CH2, following below steps:
1. Press the F1 menu selection button and choose Source.
2. Press the F2 menu selection button and choose CH1.
3. Press the F3 menu selection button and choose CH1.
4. Press the F4 menu selection button and choose CH2.
5. Press the F5 menu selection button and choose CH2.
6. Press the F1 menu selection button and choose Type.
7. Press the F2 menu selection button and choose Freq.
8. Press the F3 menu selection button and choose Pk-Pk.
9. Press the F4 menu selection button and choose Mean.
10. Press the F5 menu selection button and choose Cyc RMS.
The measured value will be displayed in the reading window automatically (see Fig.
56).
59
Advertisement
Table of Contents
