Table of Contents
Advertisement
User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
Follow up below step to set CH1 as rising slope edge trigger and trigger mode is auto,
coupling is DC, trigger sensitivity is 0.5 Div.
1、Press "Trig menu"
2、Press "F1" to choose "Edge"
3、Press "F2" to choose slope as "Rising"
4、Press "F3" to choose source as "CH1"
5、Press "F4" to choose trigger mode as "Auto". Display as Fig.34
6、Press "F5" to choose "Next menu"
7、Press "F2" to choose coupling as "DC"
8、Press "F3" till "Sensitivity" display as 0.5div (refer to Fig.35)
图
Fig. 34 Edge trigger (Rising Wave)
43
Advertisement
Table of Contents
