Owon MSO5022 User Manual page 80

User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
BUS setting menu as below:
Function Setting
BUS BUS0～BUS3
Channel CH0F～CH00
1X111111
11111111
CH0F ～ Include
CH00 Exclude
HEX
Code
Type DEC
For example, to set BUS0 as BUS to include CH00，CH01，CH02，CH03 and
code as hex system. Follow up as below:
1. Press "0(BUS)" to and BUS menu appears
2. Press "F1" till BUS display as "BUS0"
3. Press "F2" or turn "CH1 Volts/div" knob till channel display as
"CH00"
4. Press "F3" and set CH00 as "Include". Then Channel CH00 refer to
display of "1"
5. Repeat the operation of steps 2. 3 and set CH01, CH02, CH03 as
"Include" and other channel as "exclude". Then "CH SEL" display as
"XXXXXXXXXXXX1111". BUS setting finished.
6. Press "F4" and set code type as "HEX"
BUS setting is finished (refer to Fig. 79).
Fig 78：Bus menu
Instruction
Choose BUS for operating
Choose any channel among CH00~CH0F
BUS channel complex indication: 1 for include; X
for exclude
The bus selected includes this channel
The bus selected excludes this channel.
All of the code type and measured value are
HEX
All of the code type and measured value are
DEC
80