Example 5: Application Of X-Y Function - Owon MSO5022 User Manual

User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope

Example 5: Application of X-Y Function

Examine the Phase Difference between Signals of two Channels
Example: Test the phase change of the signal after it passes through a circuit network.
Connect the oscilloscope with the circuit and monitor the input and output signals of
the circuit.
For the examination of the input and output of the circuit in the form of X-Y
coordinate graph, please operate according to the following steps:
1. Set the probe menu attenuation coefficient for 10X and that of the switch in the
probe for 10X.
2. Connect the probe of channel 1 to the input of the network and that of Channel 2
to the output of the network.
3. Push down the AUTOSET button, with the oscilloscope turning on the signals of
the two channels and displaying them in the screen.
5. Adjust the VOLTS/DIV knob, making the amplitudes of two signals equal in the
rough.
Fig. 94 Wave Form of the Noise-Removed Signal
97
]