Example 3: Capture The Single Signal - Owon MSO5022 User Manual

User's Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
7. Press the F2 menu selection button and choose Pk-Pk.
8. Press the F3 menu selection button and choose Pk-Pk.
10. Read the peak-to-peak values of Channel 1 and Channel 2 from the displayed
menu (see Fig. 91).
11. Calculate the amplifier gain with the following formulas.
Gain = Output Signal / Input signal
Gain (db) = 20×log (gain)

Example 3: Capture the Single Signal

The digital storage oscilloscope takes the lead in providing the convenience capturing
of such non-periodic signals as pulse and burr, etc. If you intent to capture a single
signal, you can not set the trigger level and the trigger edge unless you have particular
priori knowledge of this signal. For example, if the pulse is the logic signal of a TTL
Fig. 91 Wave Form of Gain Measurement
93