Agilent Technologies G7035A Operation Manual page 6

6
LCP status messages
To view system status during startup
LCP menus 50
The EI GC/MSD Interface
Before You Turn On the MSD
Pumping Down 56
Controlling Temperatures
Controlling Column Flow
Venting the MSD 57
To View MSD Temperature and Vacuum in Manual Tune
To Set Monitors for MSD Temperature and Vacuum Status
To Set Analyzer Temperatures from the Instrument Control
View 61
To Set the GC/MSD Interface Temperature from MassHunter
To Monitor High Vacuum Pressure
To Calibrate Column Flow Linear Velocity
To Tune the MSD in EI Mode
To Verify System Performance
To Perform High-Mass Testing (5977 Series MSDs)
To Open the MSD Covers
To Vent the MSD 76
To Open the Analyzer Chamber
To Close the Analyzer Chamber
To Pump Down the MSD in EI Mode
To Move or Store the MSD
48
49
53
55
56
56
64
66
69
71
75
78
80
84
86
5977 Series MSD Operation Manual
58
59
63
72