Table of Contents
Advertisement
<method> Complete <timestamp>
The run and subsequent data processing are done. The same message appears
even if the run was terminated prematurely.
Method Loaded <method name>
Method parameters were sent to the MSD.
MS Locked by <computer name>
MS parameters can only be changed from the MassHunter Data Acquisition.
Press Sideplate
A reminder during startup to press the MSD side plate to ensure an adequate
vacuum seal.
Run: <method> Acquiring <datafile>
A run is in progress; data is being acquired to the designated data file.
To view system status during startup
1
2
5977 Series MSD Operation Manual
The following messages are displayed on the LCP display during startup:
•
Press Sideplate
•
Loading OS
•
Press Sideplate
•
Loading MSD Firmware
Continue to press the sideplate of the MSD until the MSD Ready message
appears. This helps the instrument to pump down more quickly.
Operating in Electron Ionization (EI) Mode
3
49
Hide quick links:
Advertisement
Table of Contents
