Basic Systems - Preparing Cl/Ql Series And R Series; Checking Firmware Versions And Compatibility; Unit Id Settings - Yamaha CL Series System Design Manual

Hide thumbs Also See for CL Series:

Table of Contents

3. Basic Systems – Preparing CL/QL series and R series

Before setting up a system, please check the version compatibility of each Dante device. If any device

with an incompatible version of firmware is used in the system, it may not get configured correctly, or

may have unexpected behavior. Remember that most devices have additional firmware files for their

Dante modules.

Make sure:

version compatibility of all the devices in the system

・

version compatibility of each device and its built-in Dante module

・

For the latest information and compatibility chart, visit the following page:

https://download.yamaha.com/files/tcm:39-1161321?_ga=2.7041458.1091912117.1544573794-

440072770.1543301352

Each CL/QL console and R series I/O rack relies upon a unit ID number for device recognition, remote

control functions and system management. It is important to set the ID numbers before constructing

a system. Understanding the scope of the ID numbers helps with system design.

Console ID

There can be up to four CL/QL consoles with a unique "Console ID" in a system. This ID number

determines what each console can do, and which settings will be shared with the R series devices in

the system. Find the Console ID in the DANTE SETUP menu.

Table of Contents

Ql series