Groups Menu - Honeywell IAQPoint2 User Manual

Groups Menu

Programming groups of transmitters allows several units to be
combined which then enables actions (events) to be taken based on a
series of units rather than each unit, individually.
A group is a stack containing the addresses from each of the
transmitters included in the group.
Groups are displayed in a single line; if a group contains more than four
components, the arrows must be used to scroll left and right of the
display window to view all members of a group.
The cursor in the Group screen is represented by the blinking brackets
(<end>). Any information between the brackets can be edited.
M-510324
7/10
MENU
1. TxInfo
2. Groups
2. Groups
<end> [----] [----]
[----] [----] [----]
empty all groups
301C User Manual
Honeywell
System Programming
3. Events
4. Acqui
001
[----]
[----]
Groups Menu
37