Specifications - Honeywell IAQPoint2 User Manual

IAQPoint2™

Specifications

Description
Gas
Detection method
Monitor with
Ranges
CO sensor
2
Accuracy
Response Time
Calibration
Gases
Detection method
Monitor with
VOC sensor
Range
Calibration
Temperature Range
Temperature Accuracy
Humidity Range
Humidity Accuracy
Duct-mount Air Velocity
Power in
System
Consumption
Operations
Dimensions
Weight
Enclosure
Display
Languages
Software class
Hardware circuitry
Impulse withstand voltage
Storage temperature
Analog
Digital
Outputs
Relay
Wall mount
Mounting
options
Duct mount
US
Canada
Certifications
Europe
International
Warranty
1 allow an additional ±2% of reading for calibration gas cylinder
2 self-calibration period: 2-3 weeks; warm-up time to spec precision: 1 minute
3 additional uncertainty of 2% of the reading for readings greater than 2,000 ppm
4 in still air after calibration
56
CO
2
Non-dispersive infrared (NDIR) with automatic background calibration
(ABC) algorithm
0-2,000 ppm, 0-5,000 ppm
±30 ppm ±3% of reading at 25°C from 0 to 2,000 ppm
T <60 seconds
90
Not required
Volatile organic compounds (VOCs)
Metal oxide semiconductor (MOS)
0-100 air quality index
Not required
32°F to 122°F (0°C to 50°C), 32°F to 104°F (0°C to 40°C) for wall-mount
±0�5°C at 25°C and 50% rH ±1�5°C over range
0 to 95% rH, non-condensing
±5% at 25°C and 50% rH
440 ft/min (2�2 m/s) minimum, 1760 ft/min (9 m/s) maximum
20 to 30 VAC; 18 to 28 VDC
typical: 188 mA @ 24 VAC (150 mA minimum, 281 mA maximum)
Analog
typical: 87 mA @ 24 VDC (75 mA minimum, 174 mA maximum)
typical: 174 mA @ 24 VAC (135 mA minimum, 215 mA maximum)
RS-485
typical: 83 mA @ 24 VDC (75 mA minimum, 120 mA maximum)
typical: 174 mA @ 24 VAC (135 mA minimum, 215 mA maximum)
LonWorks
typical: 83 mA @ 24 VDC (75 mA minimum, 120 mA maximum)
3�0 in� W x 4�6 in� H x 1�5 in� D (77 mm x 118 mm x 37 mm)
wall-mount: 0�44 lbs (0�20 kg); duct-mount: 0�70 lbs (0�32 kg)
ABS
TFT, multicolor graphical touchscreen, 1�9 in� W x 2�6 in� H (49 mm x 65
mm); optional with analog units
English, French
B
Class 1
2 kV
to 122ºF (-10ºC to 50ºC)
4-20 mA or 2-10 VDC (field selectable)
Modbus RTU, BACnet MS/TP, BTL listed, LonWorks FTT-10
3 amps, 250 VAC resistive, and 30 VDC SPDT; field configurable setpoint
and hysteresis
IP22
IP54
ANSI/UL 61010-1
CAN/CSA C22�2 No� 61010-1
EN 61010:2010
IEC 61010:2010
One year
Value
1, 2, 3
4
4