Function 9 - Save Parameters And Close Device; Cancelling All Commands - Honeywell IAQPoint2 User Manual

Function 9 - Save Parameters and Close Device

Sends a shutdown command to the transmitter, which will save all
parameters and power down.
• Press pushbutton 1
• Press pushbutton 2, count 10 blinks and release.
• Press pushbutton 1.
Both LEDs will remain on while the transmitter saves its parameters.
When the LEDs are off, the unit has successfully powered down.

Cancelling all commands

It is always possible to stop all commands, or functions, that are being
executed by the transmitter:
Press on both pushbuttons simultaneously and count two blinks before
releasing.
All commands have been stopped.
511398
5/07
301W User Manual
Honeywell
Using the Transmitter
How to Program the Transmitter
27