Ident Menu - Honeywell IAQPoint2 User Manual

System Programming
Tx Info Menu

Ident Menu

The Ident, or identification menu allows a component's network ID to be
consulted:
The upper right corner of the screen shows the component's address. If
the address of the device whose information must be viewed is known:
• Use the arrows to move the cursor arrow to the on-screen address
• Press Enter (the value can be edited while the number is flashing)
• Use the up or down arrows to increase or decrease the value
• Press Enter again to validate the entry and display the information
for the desired device.
The bottom left corner of the display shows the transmitter name (ex.:
301D2 - product name) and the sensor type (ex.: CH4 - methane
sensor). These values can also be changed for Group or Vulbus
product types. The procedure is identical for both fields:
Programming or changing a product or sensor type
• Use the arrows to move the cursor to the product type field.
• Press Enter to select the field (the value can be modified when
flashing)
• Use the arrows to scroll through the list of product types and press
Enter when the desired product or sensor appears
24
1. Tx Info
-Ident-
NotVul
CO2 (IR)
96d User Manual
Honeywell
001
M-511401
8/10