Elements Drawing - Honeywell IAQPoint2 User Manual

Remote Sensor

Elements Drawing

2
1. Sensor
2. Mounting screws (2) (not included)
3. Single outlet extra wide (2 3/8") electrical box (not included).
T&B BC1110, Hubbell 1110, OZ-Gedney 18112, Appleton
18112, Bowers 10612-BW, Steel City 68371-12. It does not fit
steel boxes such as a 4x4" box with a single gang mud ring such
as T&B 52C0 or 52C13
4. LED indicator—blinks to indicate communication with main unit
To change a sensor cartridge, disconnect all power to the device,
remove the back cover, and pull out the "smart sensor" cartridge and
press the replacement cartridge into place. Once the Smart Sensor
is firmly in place, replace the back cover and reconnect power. Use
caution when pressing the Smart Sensor into place to avoid bending
the pins.
Alarm Menu
See
types.
28
Figure 10. Parts of the Remote Sensor
for special instructions for sensor changing gas
E Point Standalone Gas Monitor User Manual
3