Fcc Specifications - Honeywell IAQPoint2 User Manual

FCC Specifications

Note: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
511398
5/07
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
The internal / external antennas used for this mobile
transmitter must provide a separation distance of at least
20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or
transmitter."
Modifications not expressly approved by this company
could void the user's authority to
operate the equipment.
Qualified personnel must install radio communication
devices. Improper installation or selection of a
transmitter's location may cause intermittent or unreliable
performance
301W User Manual
Honeywell
Specifications
FCC Specifications
38