Configurations - Honeywell IAQPoint2 User Manual

IAQPoint2™

Configurations

The base configuration of the IAQPoint2 monitor:
• CO or VOC sensor
2
• analog output (4-20 mA or 2-10 V)
• wall mount
• no display
Figure 4. IAQPoint2 base configuration
The monitor is also available with an LCD touchscreen display with either analog
output or digital output� The monitor can be configured with any combination of
these features:
• Wall mounted or duct mounted,
• With or without an LCD touchscreen display,
• With a CO sensor or a VOC sensor,
2
• With or without an rH/temp sensor,
• With or without a relay, and
• With one of these communication options:
1� Analog output, 4-20 mA or 2-10 VDC (field selectable)
2� Modbus/BACnet (field selectable)
3� LonWorks
Figure 5. IAQPoint2 display configuration
8