Alarm Menu - Honeywell IAQPoint2 User Manual

Alarm Menu

CAUTION:
!
programming functions of this unit. Factory settings conform to specific
standards (see Specifications). Any changes made to Alarm Levels may
affect manufacturer's stated standards compliance.
The Alarm menu allows users to define different alarm levels than the
factory settings. Press enter to access the Alarm menu options. If there
is a remote sensor connected, scroll to select either Z1 (built-in sensor)
or Z2 (remote sensor).
Use the arrow keys to scroll to the Alarm A, B, or C option and
•
press enter to select. The screen displays the default alarm
level.
There is no Alarm C option for the remote sensor (Z2).
• Use the arrow keys to increase or decrease the value to the
desired level and press enter.
When alarm settings are modified by the customer, the new values
are stored in the main device and do not need to be modified again
when a sensor is replaced.
!
WARNING:
previously stored values will no longer be valid and must be corrected.
• The next screen displays the hysteresis value. Use the arrow
keys to increment or decrement the value and press enter.
E Point Standalone Gas Monitor User Manual
3
Only qualified, knowledgeable personnel should use the
* Menu *
Alarm
Alarm
A
Alarm A
0025 PPM
If a different type of gas sensor catridge is installed, the
Hyst A
-05
Using the Programming Menus
Alarm
Z1
19