Table of Contents
Advertisement
SENSEPOINT RFD OPERATING MANUAL
The transmitter automatically returns to normal gas detection mode from any
configuration menu if a button is not pressed for 30 minutes (unless the menu
Timeout option is disabled, see the P-07 menu option).
After completing any changes always ensure that the transmitter is returned to
normal gas detection operational mode from inhibit by pressing the OK button.
The symbol
is displayed when the detector is in inhibit mode.
8.4 Menu functions
The table below shows the function, description and section reference for the 9
menus that can be displayed on the transmitter using the remote handheld interface.
To access the menus press the Menu button on the remote handheld interface.
Code Function
P-00
Set zero
P-01
Set span
P-02
Set alarm 1
P-03
Set alarm 2
P-04
Set relay 1
P-05
Set relay 2
P-06
Set connection
type
P-07
Set inhibit current
and timeout
P-08
Display software
version
Description
Zero the detector
Set the detector span
Change alarm level 1 or set as fault
Change alarm level 2
Set relay 1 to energized or de-energized
Set relay 2 to energized or de-energized
Set sensor type and range
Set inhibit current and disable or enable
configuration menu timeout
Display software version of transmitter
Table 7: Transmitter menu descriptions
21
RFDMAN MAN0843 Issue 3
Reference
section
9.1
9.1
10.1
10.2
10.3
10.4
10.5
10.6
10.7
Advertisement
Table of Contents
