Honeywell IAQPoint2 User Manual page 674

ModbsID Menu Options
This option lets you set a different Modbus address
than the factory set address.
CAUTION
When you first access the Modbus ID option, the screen displays the
current address with the first character underlined.
ModbsID
097
desired for the new Modbus address
• Press ESC to return to the previous menu.
510846
4/07
The 301ADI Modbus address must be set to 097 for it to
be recognized by the 301C controller.
•Use the UP or DOWN buttons to increase or
decrease the character value.
•When the correct value is displayed, press
ENTER.
•Continue until all characters are set as
301ADI User Manual
Honeywell
Configuration
ConfigDI Menu Options
*MENU*
ModbsID
19