Honeywell IS3016 Installation Instructions

Passive infrared motion sensor

Download this manual

IS3016 Passive Infrared Motion Sensor – Installation Instructions

QUICK LINKS

Mounting Location Guidelines

Open the Sensor

Mount the Sensor

Sensor Components and Settings

Wire the Sensor

Mounting location guidelines:

• The maximum range is obtained at a mounting height

of 2.3m (7' 6").

• Allow a clear line-of-sight to all areas to protect.

• Do not directly face windows.

• Avoid close proximity to moving machinery, fluorescent lights, and

heating/cooling sources.

• Not for use in applications with pets.

Wiring Example

Walk Test the Sensor

Detection Patterns

Relay Operation

Troubleshooting

1. Turn the arrow to point to the Unlock symbol.

2. Press firmly on housing latch.

3. Gently separate the front and rear housing.

Sensor Specifications

Accessories

Approval Listings

[EN] = approved installation.

Page 1 IS3016 Passive Infrared Motion Sensor – Installation Instructions QUICK LINKS Mounting Location Guidelines Wiring Example Sensor Specifications Open the Sensor Walk Test the Sensor Accessories Mount the Sensor Detection Patterns Approval Listings Sensor Components and Settings Relay Operation Wire the Sensor...
Page 2 See wiring details and examples on page - 2 -...
Page 3 WIRING DETAILS - Observe proper polarity. Notes: - If not using the integrated EOL resistors, set all switches to OFF. - Consult the Control Panel manual to determine proper EOL selection. - If using the integrated EOL resistors: - The Alarm and Tamper EOL settings must each 1.
Page 4: Troubleshooting
Please contact your local authorised Honeywell representative for product warranty information.  2013 Honeywell International Inc. Honeywell and DUAL TEC are registered trademarks of Honeywell International Inc. All other trademarks are the properties of their respective owners. All rights reserved.