Standard Parts List - Honeywell IAQPoint2 User Manual

• To clear the asterisk from the display, press the ESC key for 8
seconds.
NOTE: If the system has experienced an over range condition, the sensor
should be bump tested to verify that it still responds to the presence of gas.
It should also be recalibrated at the next maintenance interval. See
Inspection and

Standard Parts List

 
Item # Description
1 E Point cover
3
2 E Point housing base
3
3 Main sensor assembly
4 Large rectangular J-box (not included)
5 Captive screw 10-32 x ½" (tamper proof screw also available)
E Point Network Gas Monitor User Manual
3
Maintenance.

Figure 7. Parts of the E
Specifications

Point
3
Periodic

29