Relay Outputs
The relays outputs will withstand up to 5
amps at 30 Vdc or 250 Vac (resistive
load only). They can be used to activate
horns, strobes, etc. Refer to drawing
below for proper wiring.
See APPENDIX section in the 301EM
User's Manual for more details about B-
52 and ASHRAE standard configuration.
RELAY OUTPUTS
6
4
5
3
RISK OF ELECTRIC SHOCK
Output 24 Vdc, J8
The three 24 Vdc / 250 mA outputs are provided to activate DC horn,
strobe, etc.
RFS: Optional built-in stobe
RFSA: Optional built-in stobe and horn
511395
2/07
2
Normally
3+5
open
4+6
Normally
1+3
1
closed
2+4
301EMRP User Manual
Honeywell
Installation Instructions
Wiring Details
15