Honeywell IAQPoint2 User Manual page 315

Specifications
To change a sensor cartridge, disconnect all power to the device, pull
out the "smart sensor" cartridge, and press the replacement cartridge
into place. Be sure TOP/HAUT is toward the top of the unit. Once the
Smart Sensor is firmly in place, reconnect power. Use caution when
pressing the Smart Sensor cartridge into place to avoid bending the
pins.
Please see
section for special instructions for sensor changing gas types.
Duct Mount Parts List
1
Housing cover
30
Using the Programming Menus
3
2
Ductmount housing
Figure 8. Parts of the Duct Mount
Item # Description
1 E Point duct mount assembly cover
3
2 E Point duct mount assembly base
3
3 Air intake and exhaust tubes
4 Plug (for air intake tube)
in the Alarm Menu
4
Air flow
Air intake tube
Air exhaust tube
E Point Network Gas Monitor User Manual
3