Introduction; Intended Use; Receiving And Unpacking - Honeywell IAQPoint2 User Manual

The 301C controllers act as nerve centers for gas detection networks,
providing continuous monitoring for up to 96 connected units (plus 1
301ADI). Since the controllers are factory programmed to the owner's
specifications, installation is limited simply to mounting and connecting
them. Once installed and connected, the controllers allow the user to
monitor, adjust, or reconfigure an entire network of units.
The 301C has a supplementary option of the wireless coordinator that
enables this controller to communicate with and manage up to 25
wireless gas detection devices in addition to its regular capabilities.

Intended Use

The controller is intended to monitor an entire gas detection network
around the clock. The unit offers logging capabilities, creating log files
of all transmitter concentrations and alarms for analysis. The unit is
also equipped with grouping or zoning capabilities that allow users to
query and monitor specific groups of transmitters or specific transmitter
zones.

Receiving and Unpacking

Upon receiving the controller unit:
• Check that the package is undamaged
• Carefully open the package.
• Locate the packing slip or purchase order and verify that all items
on the order are present and undamaged
Note: If the package or any of its contents are damaged, please refer to
the Warranty section at the back of the manual for instructions.
M-510324
7/10

Introduction

301C User Manual
Honeywell
Introduction
11