Mounting - Honeywell IAQPoint2 User Manual

Installation

Mounting

Mounting
3
The E Point Remote Sensor is designed to be mounted in an extra
wide (2 3/8") electrical box (not supplied) in the same way as a
faceplate. Suggested electrical boxes include T&B BC1110, Hubbell
1110, OZ-Gedney 18112, Appleton 18112, Bowers 10612-BW, or
Steel City 68371-12.
It does not fit on 4x4" steel boxes with a single gang mud ring, such
as T&B 52CO or 52C13.
Run the wires through the electrical box and connect to the
remote sensor (as indicated in
Press the sensor (2) into the faceplate (1) and close and press
the back cover (3) into the faceplate. You should hear a click.
Securely mount the unit to the extra wide electrical box (4) using
the appropriate screws (5).
4
2
3
Figure 1. E Point Remote Sensor Parts
Figure 2).
3
E Point Remote Gas Sensor User Manual