Standard Mounting Parts List - Honeywell IAQPoint2 User Manual

Specifications

Standard Mounting Parts List

 
Item # Description
1 E Point cover
3
2 E Point housing base
3
3 Main sensor assembly
4 Large rectangular J-box (not included)
5 Captive screw 10-32 x ½" (tamper proof screw also available)
To change a sensor cartridge, cut all power to the device and simply
pull out the "smart sensor" cartridge and press the replacement
cartridge into place. Be sure TOP/HAUT is toward the top of the unit.
Once the Smart Sensor is firmly in place, reconnect power. Use
caution when pressing the Smart Sensor cartridge into place to avoid
bending the pins.
Alarm Menu
See
special instructions for changing sensor gas types.
36

Figure 11. Parts of the E
in the Using the Programming Menus, section for

Point
3
E Point Standalone Gas Monitor User Manual
3
