Status; Database - Honeywell IAQPoint2 User Manual

Status

This screen displays the current event status and allows it to be either
enabled or disabled, depending on the current status.
Enable event:This is a "toggle" switch; press Enter to change the value
After going through all the steps and programming an event, this screen
will display "Enable event". Press Enter to activate all the parameters
and enable the Event.
If an existing Event is being consulted, this screen would display
"Disable event". Press Enter to disable an Event (it will not be deleted
but will not function). The programming of this Event is always present,
which means that it easily can be reactivated by scrolling to this screen
and pressing Enter.

Database

This screens displays the options linked to the database:
Erase current event:Lets user erase the current event
Erase all events:Lets user erase all events
M-511401
8/10
from Enable to Disable and vice versa
-Status : disabled-
Enable event
.
Erase current event
Erase all events
96d User Manual
Honeywell
3. EVENT
3. Events 001
-Database-
System Programming
001
Event Menu
47