Table of Contents
Advertisement
VERSAFLOW MAG 1000
2.8.10 Mounting position
Figure 2-18: Mounting position
2.9 Mounting
2.9.1 Torques and pressures
The maximum pressure and torques values for the flowmeter are theoretical and calculated for
optimum conditions and use with carbon steel flanges.
Figure 2-19: Tightening of bolts
Tightening of bolts
• Always tighten the bolts uniformely and in diagonally opposite sequence.
• Do not exceed the maximum torque value.
• Step 1: Apply approx. 50% of max. torque given in table.
• Step 2: Apply approx. 80% of max. torque given in table.
• Step 3: Apply 100% of max. torque given in table.
34-VF-25-54 iss.3 GLO July 14 US
www.honeywellprocess.com
INSTALLATION
2
15
Hide quick links:
Advertisement
Table of Contents
