Maintenance; Cleaning - Honeywell IAQPoint2 User Manual

Specifications

Maintenance

Maintenance
If the transmitter experiences any communication difficulties, the fault
LED will automatically turn on. The fault LED will also light when a fault
occurs on the 301C controller. If the system is in fault mode, contact
Honeywell.
In the event of a fault, the LCD will display the following messages:
MASTER

Cleaning

• Clean the exterior with a soft, damp cloth. Do not use solvents,
soaps, or polishes.
• Do not immerse the unit in liquids.
22
WAIT
301AP User Manual
Honeywell
NO
MASTER
ERR
MEM
512227
2/08